Full model list
Every series we supply, with the model numbers listed individually. Search for the exact model you need, then ask for an English quotation.
If you already know the model number, start with the search box below — it filters the list as you type, and matches part numbers such as 9PX3000, 93PM or GPL121000.
If you only know roughly what you need — a server rack, a clinic, a production line, a vehicle — skip the list and tell us about the site instead. Sizing is what decides whether a UPS survives the first real outage.
Each series name links to its full page with specifications, application notes and downloadable datasheets. Those pages are written in Chinese because most of our customers are local; the model numbers, ratings and PDFs are the same information, and we answer English enquiries on any of them.
No series matches that model number. Send it to us and we will confirm what we can supply.
UPS systems
Models we supply and service in Hong Kong. EATON is our primary brand; THTAK is our own product line, built in our Shenzhen factory.
EATON
Rack or tower; workstations, network gear and small machine rooms
- EATON 5PX 1000i RT2U G2
- EATON 5PX 1500i RT2U G2
- EATON 5PX 2200i RT2U G2
- EATON 5PX 2200i RT3U G2
- EATON 5PX 3000i RT2U G2
- EATON 5PX 3000i RT3U G2
Servers, labs and edge rooms; expandable battery packs, lithium version available
- 9PX1000IRT2U
- 9PX1500IRT2U
- 9PX2200IRT2U
- 9PX2200IRT3U
- 9PX3000IRT2U
- 9PX3000IRT3U
- 9PX5Ki
- 9PX6Ki
- 9PX8KiPM
- 9PX11KiPM
- 9PX6KiPM31 (3-phase input)
- 9PX8KiPM31 (3-phase input)
- 9PX11KiPM31 (3-phase input)
High overload capacity for motor and pump loads and harsh environments
- 9SX700I
- 9SX1000I
- 9SX1500I
- 9SX2000I
- 9SX3000I
- EATON 9SX 5000i
- EATON 9SX 6000i
Data centres, large machine rooms and production lines; needs full distribution and cooling design
- EATON 93T 15kVA
- EATON 93T 20kVA
- EATON 93T 30kVA
- EATON 93T 40kVA
- EATON 93T 60kVA
- EATON 93T 80kVA
- EATON 93T 100–200 kVA
Modular design — modules can be replaced and capacity added without replacing the frame
- EATON 93PX series
- EATON 93PR series
Available in 208 V and 480 V versions; mid to large machine rooms and data centres
- EATON 93PM (208 V version)
- EATON 93PM (480 V version)
Mid-size machine rooms and production control rooms with existing three-phase supply
- EATON 91PS series
- EATON 93PS series
Rack machine rooms and small equipment rooms; sized against the measured load
- DX RT 1K (1000 VA / 900 W)
- DX RT 1KS (1000 VA / 900 W, long runtime)
- DX RT 2K (2000 VA / 1800 W)
- DX RT 2KS (2000 VA / 1800 W, long runtime)
- DX RT 3K (3000 VA / 2700 W)
- DX RT 3KS (3000 VA / 2700 W, long runtime)
- DX RT 3:1 10 kVA (3-phase input)
- DX RT 3:1 15 kVA (3-phase input)
- DX RT 3:1 20 kVA (3-phase input)
Entry level, short ride-through for PCs, routers and small office equipment
- Ellipse ECO 500 IEC (EL500IEC, 500 VA / 300 W)
- Ellipse ECO 650 IEC (EL650IEC, 650 VA / 400 W)
- Ellipse ECO 650 USB (EL650USBIEC, 650 VA / 400 W)
- Ellipse ECO 800 USB (EL800USBIEC, 800 VA / 500 W)
- Ellipse ECO 1200 USB (EL1200USBIEC, 1200 VA / 750 W)
- Ellipse ECO 1600 USB (EL1600USBIEC, 1600 VA / 1000 W)
LFP cells, UL1973 certified; edge sites, unmanned rooms and hot environments
- 9PX1000IRT2U-L
- 9PX1500IRT2U-L
- 9PX2200IRT2U-L
- 9PX3000IRT2U-L
- 9PXEBM48RT1U-L (external battery module)
- 9PXEBM72RT1U-L (external battery module)
DNV-GL type approved, conformally coated boards; vessels and offshore platforms
- 9PX1500IRTM
- 9PX3000IRTM
IEC 60945 compliant, IP22 cabinet; ships' main equipment and port systems
- Eaton 9155 Marine 8–30 kVA
IP21, conformally coated boards and dust filters; industrial and poor-grid sites
- EATON 93TX 15kVA
- EATON 93TX 20kVA
- EATON 93TX 30kVA
- EATON 93TX 40kVA
- EATON 93TX 60kVA
- EATON 93TX 80kVA
Up to IP42 with standard output isolation transformer; heavy industry and harsh sites
- EATON 9EHD 10–800 kVA
Up to 8 units paralleled, 4.8 MW maximum; staged expansion, medical and automation duty
- EATON 93PR 25–200 kW
- EATON 93PR 60–1200 kW
Unity output power factor, built to military-grade requirements
- EATON 93PR Tower 300 kW
- EATON 93PR Tower 400 kW
- EATON 93PR Tower 500 kW
- EATON 93PR Tower 600 kW
Built on a military-grade platform with a highly redundant design
- Power Xpert 9395 200–1200 kVA
Pure sine wave output, up to 98% efficiency; workstations, POS and NVR
- 5P650
- 5P850
- 5P1150
- 5P1550
- 5P850IR (rack 1U)
- 5P1150IR (rack 1U)
THTAK — our own product line
Rack and tower models, lithium cells built in
- ET1-3KR (rack-mount, LiFePO4)
- ET1-3KVA (tower, LiFePO4 built in)
- ET1-6KRS (rack-mount, external LiFePO4 pack)
230 V input and output, lithium cells built in; network racks and shops
- LT500 series (500 VA class)
- LT1000 series (1000 VA class)
- LT1500 series (1500 VA class)
100 / 110 / 120 / 127 V output — for low-voltage supplies and overseas projects
- D1KVA (1 kVA)
- D2KVA (2 kVA)
- D3KVA (3 kVA)
APC / Schneider Electric
Entry-level models for workstations, routers, CCTV and POS — check waveform and capacity
- APC Back-UPS BK650M2-CH
- APC Back-UPS BX1100CI-CN
- APC Back-UPS 1000VA
Other UPS models
100 / 110 / 120 V output; low-voltage distribution and space-limited sites
- DT1K (1 kVA)
- DT2K (2 kVA)
- DT3K (3 kVA)
Also supplied on request
- Santak / Vertiv online UPS — General machine-room models — specified against the measured load
- High-frequency tower UPS (generic) — For SMEs and shops; sized against the actual load
- Line-interactive tower UPS (generic) — Cost-effective protection where the supply is reasonably stable
- Low-frequency UPS with isolation transformer (generic) — Stronger surge tolerance for industrial sites and poor grids
Batteries and battery packs
Replacement batteries and battery packs. We replace complete strings rather than mixing old and new blocks.
VRLA / AGM batteries
Extends runtime on Smart-UPS RT / SRT models — must match the host model
- APC Smart-UPS RT 192 V rack battery pack (2 strings)
- APC Smart-UPS SRT 192 V 5 kVA / 6 kVA rack battery pack
Small-capacity maintenance-free blocks for small UPS, access control and CCTV
- LEOCH DJ series (12 V, 1.2–28 Ah by capacity)
General-purpose blocks for UPS strings, telecom and security systems
- LEOCH DJW series (12 V, by capacity)
Larger blocks for mid-size UPS strings and DC power systems — plan floor loading
- LEOCH DJM series (12 V, by capacity)
Standard 12 V blocks, widely interchangeable; small UPS and instrumentation
- CSB GP1272 F2 (12 V 28 W)
- CSB GP series, other capacities by model
Long-life design for machine-room UPS strings and extended-runtime systems
- CSB GPL121000 (12 V 100 Ah)
- CSB GPL series, other capacities by model
Telecom-grade consistency and reliability for critical backup
- C&D DNTY series (12 V, by capacity)
Long-life design that reduces replacement frequency
- C&D LBTY series (12 V, by capacity)
Tubular gel batteries
Long design life and deep-cycle tolerance; telecom rooms, substations and solar
- LEOCH OPzV series (2 V tubular gel, by capacity)
LiFePO4 battery packs
Requires a matching BMS and charging profile; machine rooms, vehicles, tight spaces
- LD4830 (48 V LiFePO4 pack, by capacity)
Rack-mount UPS battery replacement, six 12 V 9 Ah blocks inside
- SPRM1KL battery pack (36 V, 6 × 12 V 9 Ah)
Also supplied on request
- General 12 V VRLA battery string — Sized by capacity and required runtime; strings replaced as a set
- Battery management module (BMS) — For LiFePO4 packs — over-charge, over-discharge and temperature protection
Inverters
DC-to-AC inverters from our own production base, for rack, vehicle, marine and off-grid duty.
Rack-mount inverters
DC input 24 / 48 / 110 / 220 V, AC output 110 / 230 V; vehicle, off-grid and long runtime
- H1-10K rack inverter (DC 24 / 48 / 110 / 220 V input)
Also supplied on request
- Pure sine wave inverter (generic) — Vehicle, off-grid and solar; selected by continuous and peak power
Accessories and options
The parts that decide whether a system can be monitored, serviced and expanded without downtime.
Also supplied on request
- SNMP network monitoring card — Email and SMS alerts, integration with monitoring platforms and clean server shutdown
- Rack battery cabinet — Ventilated and fused, made to the space available
- Distribution board and maintenance bypass — UPS input/output distribution with surge protection and isolation
- Battery cable and terminal kits — Host-to-cabinet connection sized to current and distance
Reading a model number
Model numbers are not decoration — they encode capacity, form factor, connector type and battery arrangement. Three things are worth checking before you buy:
- Capacity and form factor —
9PX3000IRT2Uis a 3000 VA rack unit in 2U; the same series in 3U has a different part number and a different cabinet footprint. - Connector type —
imodels for IEC outlets (C13/C19), hardwired models for larger ratings. Getting this wrong means an adapter at best and a re-order at worst. - Battery option — lithium variants carry a
-Lsuffix, and extended-runtime models use an external battery module with its own part number.
If you are comparing our price against a listing elsewhere, quote the complete model number. A lower price on a similar-looking model is usually a different capacity or connector.
Getting an English quotation
Send us one of the following on WhatsApp or through the enquiry form:
- The model number, if you already know it
- Your load list or a photo of the equipment nameplates, plus the runtime you need
- A photo of the existing UPS or battery label, for a replacement
We reply with the configuration, price, lead time and installation scope — usually within one working day. Every job we quote is installed and supported by our own engineers in Hong Kong, and we service equipment we did not originally supply.